= Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

NiteRider Omega 300 Tail Light Seat Post Strap Mount
$19.50
The NiteRider Omega 300 Seat Post Straps install quickly and easily with the loop around and hook design. - Compatibility: Omega 300 Tail Light only - Fits 27.2mm seat posts
Magicshine MJ-05075
$19.99
E-Cable For SHIMANO - Length: 75cm/30inch - Compatible with MJ-90XS, ME series
Magicshine MJ-05077
$19.99
E-Cable For BOSCH - Length: 75cm/30inch - Compatible with MJ-90XS, ME series
Magicshine MJ-6260B
$17.49
Helmet mount for Allty 1000 /2000 and Monteer 6500 bicycle front lights. Mount base and 2 nylon helmet straps are included, 60 degrees adjustable angle. Made with high quality materials, these durable mounts should be compatible with most vented helmet. For compatibility with 900/902/906 bike lights, a Garmin adapter is required.
Lezyne CR 2032 Battery (8-pack)
$2.99
Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.
Bontrager High Ion Light Mount for Blendr
$9.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Bontrager Transmitr Remote
$34.13 $64.99 47% Off
Welcome to the future The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights. The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more. - Transmitr remote can simultaneously control up to 7 lights - ANT+ enabled for use with all Transmitr products - Use Transmitr system for wireless on/off, mode selection, and more - Can be used with multiple Flare RT lights for turn signal configuration - Includes CR2032 battery, mount, and quick-start manual
Trek Quick Connect Rear Light Bracket
$6.49
Product details: - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16-degree offset for optimized use on seatposts
Trek Speed Concept Seatpost Reflector/Flare Mount
$3.99
Key features - Reflector mount for first and second generation Speed Concept seatposts - To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)
Topeak BarXtender
$27.49
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Topeak CubiCubi USB Charging Dock
$29.99
For CubiCubi 500 / 850 / 1200 - Charges two batteries simultaneously
No Image
$4.99
For mounting rear lights on Topeak Tubular Rack, MTX BeamRack or any rack with 80 mm (center to center) mounting holes.
Serfas Aero Headlight Bracket
$11.99
Replacement Part – Aero Headlight Bracket - Works For Both Headlights & Tail Lights - 3 Strap Sizes Allows Fitting From 20mm To Over 100mm - Adjusts To Fit Aero & Round Seat Posts & Handlebars - Fits All Serfas Headlights Except: USL-200 & USL-450
Serfas E-Lume Series Headlight Replacement Battery
$19.99
Battery Replacement Guide For E-Lume Series Headlights: - E-Lume USL-200/250, 1-Cell Li-Ion 1400 mAh (ESB-1400) - E-Lume USL-450/500, 1-Cell Li-Ion 2200 mAh (ESB-2200) - E-Lume USL-600/650/850/900, 1-Cell Li-Ion 2600 mAh (ESB-2600) - E-Lume USL-1100/1200, 2-Cell Li-Ion 2200 mAh (ESB-4400) - E-Lume USL-1500/1600, 2-Cell Li-Ion 2600 mAh (ESB-5200) - Battery Removal/Installation Instructions Included - Allen Key Tool Included
Serfas Multi Sport Head/Tail Light Bracket
$11.99
Replacement Part – Multi Sport Headlight & Tail Light Bracket - Works for both headlights & tail lights - Great for helmet application - 3 strap sizes allows fitting from 20mm to over 100mm - Adjusts to fit aero & round seat posts & handlebars - For lights up to 120 grams in weight - Cannot be used with: TST-70, TST-100, TST-150, TBT-50R, TBT-120F, USL-200, USL-250, USL-450, USL-500
Serfas True Series Headlight Spare Battery
$29.99 - $34.99
Replacement battery for 2019 True Series MTB & Road headlights. Plastic storage case included.
Paul Component Engineering Gino Light Mount
$58.70
The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt
Paul Component Engineering Stem Cap Light Mount
$113.00
- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"
NiteRider Adjustable Angle Tail Light Strap Mount
$20.50
The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb
NiteRider Aero Handlebar Mount (Lumina or Mako Series)
$29.00
For those that ride with the sleek performance of Aero handlebars, NiteRider offers a light mounting solution that allows for increased visibility and safety while you're out clocking in those high-speed miles. With the proper strap tension set, the Aero Handlebar Mount is secured in to place delivering a high degree of stability by way of the soft rubber pad under the mount. Enjoy all the benefits of Aero handlebars, while increasing your road visibility with NiteRider Lumina or Mako Series lights and the Aero Handlebar Mount. Fits all Aero style handlebars. SYSTEM COMPATIBILITY - Lumina Series - Mako Series - MiNewt Cordless Series
NiteRider Double Taillight Rack Mount
$26.00
The NiteRider Double Taillight Rack Mount allows for the installation of 2 NiteRider taillights. It attaches securely with the rack mount for that perfect fit. It features a quick release tab on each mounting point that allows you to remove just your taillight, leaving the whole mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. SYSTEM COMPATIBILITY - Sentinel - Omega 330 - Solas - Sabre - CherryBomb - TL 5.0 SL - Vmax+ 150 NOT COMPATIBLE WITH Emax+ 150, OMEGA 300, SENTRY AERO 260, AND BULLET 200 TAILLIGHTS
NiteRider Explorer Headband Mount
$61.00
The Explorer headband adjusts to various head shapes and sizes. System Compatibility: - Explorer 350 - Pro Series - HID Series - Classic Plus & Seclect - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
NiteRider Handlebar Clamp Mount 35mm
$20.50
All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)
NiteRider Hardshell Helmet Mount
$41.00
The NiteRider Hardshell Helmet Mount gives you the option to mount your head light directly onto your hardshell helmet using high strength 3M VHB adhesive. ?Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
NiteRider Lumina Handlebar Strap Mount
$20.50
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
NiteRider Lumina Helmet Mount
$31.00
Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
NiteRider Lumina Stick-On Mount
$53.80
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series
NiteRider NiteLink Remote
$59.99
The NiteLink remote allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. - All New design equipped with NiteLink Wireless Technology - Lights sold separately
NiteRider NiteRider GO ActionCam Aero Mount
$29.00
For those that ride with the sleek performance of Aero handlebars, NiteRider offers a GO Action Camera mounting solution. With the proper strap tension set, the Aero Handlebar Mount is secured in to place delivering a high degree of stability by way of the soft rubber pad under the mount. Enjoy all the benefits of Aero handlebars, while being able to mount your Go Action Camera to record all your adventures! FEATURES - Fits all Aero style handlebars. - Stable and secure accessory mount. - Lifetime Guarantee against material or manufacture defects. - Damages due to abuse or crashing excluded. - Weight: 30 g
NiteRider NiteRider GO ActionCam C2 Handlebar Mount
$34.00
Dual mounting for phone and/or GPS on handlebars. The NR GO ActionCam C2 Handlebar Mount features 2 Action Cam style mounting points. If you're looking for options to mount various accessories, NiteRider Lumina, Mako, or Pro series lights (ActionCam mount adapter required, see Lighting System Compatibility below); this is the accessory you've been looking for. LIGHTING SYSTEM COMPATIBILITY - Lumina and Mako Series (ActionCam Lumina / Mako mount adapter required SKU#4005) - Lumina and Mako Series (K-Edge Aluminum ActionCam Lumina / Mako mount adapter required SKU#4000) - Pro Series (ActionCam Pro Series mount adapter required SKU#4011) FITS HANDLEBAR SIZES 22mm—31.8mm
Page 1 of 3 Next page