Pumps/Inflation

Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g

Get accurate and precise results every time with RockShox's High-Pressure Digital Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large digital BAR/PSI readout. It runs off one CR2032 battery (included) and the hose swivels 360-degrees to fit anywhere.

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.

If you're rolling on fat tires, the Fat Max 15 is for you. Most tire gauges just don't offer the precision needed for fat tires where 1 or 2 psi can make a huge difference. The strong and durable Fat Max 15 is specifically designed to read tire pressures from 2-15 psi so you can take the guess work out of finding the right pressure for your fat tire bike. - Designed with a low pressure range of 2-15 psi specific for fat bike tires - Durable case and crystal lens - Retains reading until reset - White face plate for easier reading - Compatible with Presta valves with removable core - Presta/Schrader adaptable head - Length: 120mm - Weight: 101 grams

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

220 PSI replacement analog pressure gauge for 2014 and later models of Alloy, CNC, and Classic pumps, includes glue and o-ring. Highly precise with an oversized 3.5 inch face, this new gauge increases visibility and allows the user to read a more precise measurement of low and high pressure tires. Included on our CNC, Alloy, and Classic floor drives.

Replacement rubber hose and ABS Flip Thread Chuck for all high-pressure floor pumps and Micro Floor Drive (HV/HVG & HP/HPG) hand pumps. Includes all necessary aluminum connectors.

Lezyne's Micro Floor Drive HPG is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg and aluminum construction make it easier than ever to pump up to a maximum pressure of 160 psi. You'll appreciate the ergonomic handle, extra-long hose with an inline pressure gauge and Presta/Schrader-valve compatibility. A frame mount and Speed Chuck is included, too.

- Tall 25-inch alloy barrel with SureFoot steel base - UnoHead Comp head fits Schrader / Presta - 3-inch low-profile Accurite gauge | 160 psi / 11 bar - 36-inch replaceable rubber hose - Ergonomic V-handle - Integrated storage for ball and toy adapters

Featuring a foot activated high pressure / high volume switch. Details - Foot activated high pressure / high volume switch - Lightweight alloy base for stability - Corrosion resistant aluminum body and base - Smart head: presta & schrader ready - Hidden needle adapter & plastic valve adapter - 160 psi / 11 bar - Bar / psi analog gauge Specs - Pressure: 160psi / 11 bar - Warranty: 5 years

- For use with Bontrager CO2 cartridges - Regulator design provides safe, controlled operation - Reusable cartridge insulator keeps hands protected while inflating - Compact and lightweight design is easy to store for any ride - Spring-loaded mechanism regulates airflow for both Presta and Schrader valves

A floor pump and a tubeless setup tool in one. Set to Charge for a pressurized chamber that makes at-home and on-the-fly setup of tubeless ready (TLR) tires a breeze. Tubeless setup made simple TLR Flash Charger is the single-pump solution for daily use and at-home tubeless setup. It functions just like a standard floor pump when set to 'Inflate'. Switching it to 'Charge' gives the ability to pressurize a chamber and 'flash release' the stored air in order to seat tubeless tires without a bulky air compressor. Plus, it has a broad, back-lit digital gauge that delivers accurate pressure readings all the way to 160 PSI. Product details - Dual-chamber design with Inflate setting allows for efficient use as a traditional floor pump - Set to Charge for a pressurized chamber that inflates tubeless ready (TLR) tires without a compressor - Digital gauge provides easy-to-read accuracy up to 160 PSI (recommended maximum) - Compatible with both Presta and Schrader valves - Included inflation accessories conveniently stored in handle

Mini-pump for Gravel bikes This mini-pump has been developed to fit Gravel bike tyres, ranging from 35 to 47 mm wide. It offers the best compromise between inflation volume, ease of reaching the desired pressure and compactness. Made of aluminium, the Zéfal Gravel Mini is light and very resistant. Its flexible Z-Turn connection will give you peace of mind by avoiding bending or even breaking its Presta valve. - Weight: 105 g - Maximum recommended pressure: 5.5 bar / 80 psi - Length: 180 mm

- Z-switch System (Presta, Schrader and Dunlop compatible) - Wide Gauge - Steel Base for better stability - Ball and Bladder Heads - Max Pressure 9 bar / 130 psi - Hose length: 800mm

- Z-switch System (Presta, Schrader and Dunlop compatible) - Gauge with a magnifying lens - Integrated locking hook - Composite Base for better stability - Ball and Bladder Heads - Max Pressure 11 bar / 160psi - Hose length: 1100mm

- Z-switch System (Presta, Scharader and Dunlop compatible) - In-line Gauge - Ergonomic and lockable T-handle - Double base for better stability - Carrying bag included - Max Pressure: 10 bar / 145 psi - Hose length: 610 mm

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

The AirBooster is an incredibly small, lightweight and easy-to-use CO2 inflator. Precision CNC-machined from solid aluminum, the angled-head AirBooster fits Presta and Schrader valves and its special design allows the user to adjust the flow while filling the tire. Double-ended design allows cartridge storage. The supplied durable silicone CO2 Sleeve protects hands during inflation. * Use only Topeak CO2 cartridges. - CNC aluminum (Inflator) - Silicone rubber (Sleeve) - 22.5 g / 0.79 oz (Inflator) - 11 g / 0.39 oz (Sleeve) - Size: 4.4 x 3.7 x 1.5 cm / 1.7” x 1.4” x 0.6” (Inflator), 5.9 x 2.8 cm / 2.3” x 1.1” (Sleeve) - Double-ended design allows storage for 1 threaded CO2 cartridge - Includes CO2 Sleeve - Presta/Schrader w/integrated dust cap, push to inflate

Topeak's CO2-Bra CO2 Inflator gives you speed and convenience when it's time to fix a flat. A flip-up thumb lever puts precise flow control in your hands while the ergonomic handle gives you a better grip while inflating. An integrated safety ring prevents accidental cartridge puncture during storage. The CO2-Bra accepts threaded 16g cartridges and works with both Schrader and Presta valves.

Topeak makes it easy to air up your tires with the HybridRocket RX pump. This innovative little ride-saver is a CO2 inflator on one side and a standard pump on the other. It also boasts aluminum construction for superb durability and max pump power. The HybridRocket fits Presta valves, gets up to 160psi and easily fits into a jersey pocket.

The king has returned to rule! The new JoeBlow Ace DX features an innovative three-stage design that achieves both high pressures and high volume in record time. Stage one opens both barrels for big volume to reach 60 psi with 30% less effort than standard floor pumps. Stage two uses the main barrel only for pressures up to 120 psi while stage three engages the small barrel to achieve an amazing 260 psi. Two tone padded handles, wide stable base and new 4” base mounted analog gauge make inflation easy. The new SmartHead DX1 automatically adjusts to fit Presta and Schrader valves without swapping parts and the lower profile air release button makes getting the right pressure easy. Includes ball and air bladder type inflation needles. - SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 260 psi / 18 bar; 4” base mount analog - Base: Aluminum/Rubber - Barrel: Anodized aluminum - Handle: Oversize dual tone - Weight: 2.45 kg / 5.4 lb - Size: 74 x 28 x 22 cm/29.1” x 11” x 8.7”

Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.

The JoeBlow Pro DX’s new design brings form and function together for great performance in a floor pump. The aero-shaped aluminum barrel and wide base provide stability when pumping and the 3” top mounted analog gauge is easy to read up to 160 psi (11 bar). The large padded handles provide comfort while the extra-long hose can even reach wheels on bikes mounted in a stand. The new SmartHead with lower profile air release button automatically adjusts to fit either Presta or Schrader valves and makes getting the right pressure a simple task. - Head: SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 200 psi / 14 bar - 3” top mount analog - Base: Aluminum / Rubber - Barrel: Polished aluminum - Handle: Oversize dual tone - Added Features: Dunlop valve adapter, Presta valve adapter, Ball / bladder heads, Hose dock - Size: 74 x 28 x 14 cm / 29.1” x 11” x 5.5” - Weight: 1.8 kg / 3.97 lb

Air up your bike tires in a hurry with Topeak's JoeBlow Race Floor Pump. Its steel barrel, sturdy composite base and oversize padded handle make inflating high volume tires an easy task. For versatility, its easy SmartHead pump head tightly grips both Presta and Schrader valves, and the air release button lets you quickly fine-tune your pressure. You'll also appreciate the easy-to-read top-mount gauge and the extra-long hose.

Topeak's Joe Blow Sprint quickly inflates tires thanks to its durable aluminum barrel, a sturdy steel base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves and an oversized, padded handle. And, the easy-to-read, top-mounted gauge lets you dial in the perfect pressure every time!

Topeak's Joe Blow Turbo quickly inflates tires thanks to its durable aluminum barrel, sturdy aluminum base, a SmartHead that's compatible with both Presta and Schrader valves and a comfy, padded handle. You'll also appreciate the easy-to-read gauge.

This pump is equipped with a hardened steel base, solid steel barrel, and an easy to read top mounted analog gauge. An extra long hose with a TwinHead pump head makes it easy to reach valve stems and the integrated mini tool carrier keeps what you need for light maintenance close at hand.

The JoeBlow Sport with unique 2-stage design delivers both high pressure and high volume in record time. Stage one opens both barrels for huge volume, reaching 30 psi with 30% less effort than standard floor pumps. Stage two utilizes the small barrel for pressures up to 160 psi. Hammer type TwinHead DX5 pump head with an extra-long and tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base provide extra stability. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel / anodized aluminum - Gauge: 160 psi / 11 bar, 3" mid mount analog Stage 1 : 0 - 30 psi Stage 2 : 30 - 160 psi - Volume Per Stroke: 715cc (Stage 1), 258cc (Stage 2) - Handle: Oversize / Dual density polymer - Base: Hardened steel - Ball / bladder heads, Hose dock - Size: 74 x 26.6 x 18cm / 29.1" x 10.5" x 4.6" - Weight: 2.5kg / 5.51lb

An easy-to-read mid-mounted digital gauge delivers accurate tire pressure readings up to 160psi / 11bar. Hammer type TwinHead DX5 pump head with an extra-long, tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base with ergonomic padded handle make it easy to get your ride up to pressure fast. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel - Gauge: 160 psi / 11 bar, Mid mounted flip-down digital (Tolerance: < 100psi ± 1 psi / > 100psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 318cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushion rubber for digital gauge protection, auto off, Ball / bladder heads, hose dock - Size: 68 x 25.4 x 18cm / 26.7" x 10" x 4.6" - Weight: 1.8kg / 3.97lb

For riders that like to travel light and fast, Topeak's Micro AirBooster CO2 Inflator is an ideal tool. The MicroBooster accepts all threaded cartridges and the head allows for Schrader and Presta valves.