Wheels

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheelset yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of a hookless (straight side) rim in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

The definition of "road cycling" now includes gravel and dirt as well as pavement. At the same time, bikes are evolving to meet the fit requirements of smaller riders. Meeting these two distinct needs was the driving force behind the Zipp 303 Firecrest 650B Tubeless Disc-brake wheelset. The smaller rim size provides room within frames and forks for larger tires that deliver increased comfort, compliance, and cornering performance. With more tire between the rim and the ground, the overall wheel diameter, including the tire, is similar to a standard 700c wheel and road tire combination. Back on the pavement, the 650B is a better-fitting wheel for smaller athletes riding compatible frames. For too long, many smaller cyclists have trained and raced on standard 700c wheels, losing out on the advantages of a proper fitting wheel such as improved handling and the elimination of front wheel-toe overlap. At the center of the 303 650B Firecrest Tubeless is a versatile and durable hubset, the German-engineered ZR1 DB. - Zipp graphics and cosmetic identity that scream speed - Versatile 45mm rim profile for increased speed and better cornering, control, and comfort - Tubeless design provides secure performance when ridden at lower tire pressures - ZR1 DB hubset is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - Built with Sapim CX Sprint J-bend spokes - Center Lock rotor interface (lockring included) - Ships with 12mm end caps

Zipp's 3ZERO MOTO carbon 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

Zipp's 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheelset and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features improved seal design for better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - Lifetime Warranty

A strong, light, and durable carbon Boost road wheel with a 25mm inner width and Rapid Drive 108 hub that's perfect for higher-volume road and gravel tires. Aeolus Pro 3V is the ultimate road disc upgrade. It has a wider 25mm internal rim so you can run lower pressure for better tire support, added traction, better cornering, and a faster, more comfortable ride. Plus, a Rapid Drive 108 road hub with Boost 148 spacing adds snappy engagement for an all-around better, more confident ride. Product details - OCLV Pro Carbon offers an optimized blend of weight, strength, and durability - D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge - 25mm inner rim width (32mm outer) for added tire support to suit larger-volume road and gravel tires - Rapid Drive 108 road hubs provide quick engagement for faster acceleration and increased control - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Boost 148 wider hub flanges enhance bracing angle for stiffer wheel - No rider weight limit

- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Shimano HB-M475 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 - Skewers Included Yes

The new SLR 1 50 Disc WheelSystem combines aerodynamic efficiency and minimized power loss in a lightweight package designed for versatile road performance. The SLR 1 50 features 50mm aero rim profiles for efficiency on the flats and a dynamic ride quality on hillier roads. Hookless rims with a broad inner width offer greater support for high-volume tires along with enhanced sidewall stiffness for better grip and cornering. FEATURES - Wind-tunnel-proven 50mm Hookless Aero Rim Profile provides a maximum aerodynamic advantage - High tensile strength carbon fiber is placed at only the most crucial points to provide optimal stiffness and class-leading weight - Hookless rim design saves weight and creates a broad 22.4mm inner rim width for increased actual tire contact patch, resulting in better traction and compliance - A thick rim bead of up to 3.8mm on each side enhances rim bead stiffness, offering increased support for better cornering - Dynamic Balanced Lacing (DBL) technology makes a stiffer, more efficient wheel as a wider hub flange increases spoke bracing angles for outstanding power transmission - Low friction hub with precision machined internals eliminates excessive bearing load, reducing bearing friction, lowering rolling resistance and minimizing power loss SPECIFICATIONS - Tubeless: Giant Tubeless System (rim tape and valve kit included) - Suggested Tire Size: 700 x 25C – 700 x 32C - Rim Height: 50mm - ETRTO: 622-22 - Hub Compatibility: Shimano HG, SRAM XDR (XDR driver sold separately) - Bearing: Sealed Cartridge - Weight (Front): 703g

Zipp's 353 NSW Tubeless Disc-brake wheel is the pinnacle of our pursuit of versatility and speed. This wheel fuses Zipp's two most advanced approaches, Sawtooth rim profile and TSE, for an all-encompassing approach to performance. With its undulating 45mm-deep rim shape, the 353 NSW provides speed on every terrain with best-in-class aerodynamic efficiency and crosswind stability. The 353 NSW is Zipp's lightest tubeless wheel yet, making it a fast-puncher ready to fight its way into the breakaway. Zipp's use of hookless (straight side) rims in the 353 NSW is integral to achieving our mission of Making You Faster. With hookless, the transition between the tire and the rim is more seamless and aero. Zipp's hookless rims have more efficient resin distribution, which means lighter wheels. They also are highly durable. Zipp's 353 NSW's Sawtooth rim shape with Hyperfoils optimizes aerodynamic efficiency and crosswind stability. The Sawtooth design also allows the rim to be structurally strong but light. That will help you snap out of corners and maintain that speed no matter the terrain, especially in the steep, punchy stuff. The 353 NSW utilizes Zipp's Total System Efficiency, or TSE, approach to wheel design: overcoming specific barriers to speed: wind resistance, gravity, rolling resistance, and vibration losses. The wheel's 25mm internal width is ideal for running wider tubeless tires at reduced air pressure for a more efficient ride. At the center of the 353 NSW is the Cognition V2 Hubset, re-engineered with an updated Axial Clutch V2 mechanism for quicker engagement and lower friction, as well as improved durability. - Versatile endurance wheel for the modern road bike with tubeless and hookless rim profile - Our lightest tubeless wheel yet, making it a fast-puncher ready to fight - Optimized tire bed for easy tire installation - TSE for greater efficiency and reduced rolling resistance - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stable performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial ClutchV2 technology reduces drag and lowers friction - Ships with 12mm end caps - Center Lock rotor interface. Lockring is included - Zipp graphics applied using Zipp's ImPress direct-print technology - Lifetime warranty

A high-value, high-performance, full-carbon disc brake road wheel packed with all of the aero and performance benefits of a deep 50mm carbon rim. Wheels for free speed Unlock the speed and performance of a carbon wheel upgrade with Aeolus Elite 50 TLR. This full carbon, tubeless-ready, disc brake road wheel balances durability, weight, and aerodynamics for outstanding performance that doesn't break the bank. A proven shape with a 50mm depth and the added versatility of disc brake hubs make this the perfect high-performance, high-value carbon road wheel. All Bontrager carbon wheels are warrantied for life for the original purchaser and come with the added protection of carbon care. If you damage your wheels while riding in the first two years of ownership, we'll replace them. It’s that easy. Product details - OCLV carbon offers an optimized blend of weight, strength, and durability - D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - 50mm depth OCLV Carbon rim (27mm outer, 19.5mm inner width) Grand Strada spokes 24/24, hex alloy nipples - Center lock disc hubs with 12mm thru-axle front and rear, Bontrager 24 point engagement, 3-pawl hub - Compatible with Shimano 10/11 speed, SRAM 10/11 freehubs, 12sp available separately - Includes TLR rim strip, TLR valve, and traditional rim strip - Warrantied for life, no rider weight limit

Races, training, group rides, gran fondos—Profile’s 58/Twenty Four Full Carbon Clinchers will be your new secret weapon. Their engineers used fluid dynamic modeling and wind tunnel testing to create a super slippery 58mm-deep by 24.5mm-wide rim for maximum free speed and slicing right through head and cross winds. Adding mph are the Sapim CX-Ray bladed spokes, which have locking nipples so they stay tight. These wing-like wheels save you massive energy on the flats and they're also light enough to rocket you up the climbs. Plus, Profile's careful hand assembly and advanced carbon layup mean rock-solid stiffness for outstanding power transfer. And, because sometimes you just have to hit the brakes, Profile includes high-tech carbon wrapping and a heat-resistant resin in its rims, plus carbon-compatible brake pads come with the wheels so you'll have more stopping power than ever. Upgrade to the 58/Twenty Fours and get ready to become a better rider.

Zipp's 303 Firecrest Tubeless wheels are designed for the real world—a world of imperfect conditions, varying road surfaces, and elements where the bottom line is simple: efficiency = speed. They're faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp's drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced wind resistance, rolling resistance, rider fatigue, and weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 32mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response. The 303 Firecrest Tubeless wheels are for dedicated cyclists who aspire to the latest in technology. They're for those who compete in races, against peers, or simply to conquer personal limits. - New Zipp graphics and cosmetic identity that scream speed - Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile - Lighter weight than its predecessor, making it nimble and fast - Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire. - Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road - 40mm rim depth makes a light and aero wheel in every situation - Ships with 12mm end caps - Center Lock rotor interface (lockring included)

- Position Rear - Wheel Diameter/ISO 26'' / 559 - Axle Type 12mm TA - Hub Spacing 197mm - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 94mm - Rim inner width range 45mm+ - Rim Color Black - Rim Drilling 32 - Hub Model Novatec D202SB - Wheel Weight 1720g - Spoke Type Stainless Black - Valve Presta - Rim External Width - - Depth 20mm - Rim Model Evo JP96 - Skewers Included No

Genuine replacement parts Genuine Trek replacement wheels. Complete wheels for easy replacement. - Rim tape included - Tires not included - Spoke count: 36

Line Comp 30 is a durable alloy mountain wheel built on wider rims for better tire support. With more support, you can run lower tire pressure for better traction, more control, and a smoother ride. This trail-tough wheel stands up to hard hits, has a proven Tubeless Ready (TLR) design, and includes a 108-tooth Bontrager Rapid Drive hub for quick engagement, fast acceleration, and long-lasting performance. - Rapid Drive 108, j-bend hub instantly transfers effort into forward momentum - Updated rim design and stronger G609 alloy stands up to hard hits - Tubeless Ready (TLR) rims allow for a quick, easy transition to tubeless system - Wider Boost 110/148 hub flanges enhance bracing angle for stiffer wheel - Durable G609 alloy rim with 29mm internal, 33mm external width, 28 hole front/rear - 14G spokes with brass locking nipples - 6 bolt disc, SRAM XD driver, Shimano 10/11 speed available separately - Includes TLR rim strip installed and TLR valve

Line Comp 30 is a durable alloy mountain wheel built on wider rims for better tire support. With more support, you can run lower tire pressure for better traction, more control, and a smoother ride. This trail-tough wheel stands up to hard hits, has a proven Tubeless Ready (TLR) design, and includes a 108-tooth Bontrager Rapid Drive hub for quick engagement, fast acceleration, and long-lasting performance. - Rapid Drive 108, j-bend hub instantly transfers effort into forward momentum - Updated rim design and stronger G609 alloy stands up to hard hits - Tubeless Ready (TLR) rims allow for a quick, easy transition to tubeless system - Wider Boost 110/148 hub flanges enhance bracing angle for stiffer wheel - Durable G609 alloy rim with 29mm internal, 33mm external width, 28 hole front/rear - 14G spokes with brass locking nipples - 6 bolt disc, SRAM XD driver, Shimano 10/11 speed available separately - Includes TLR rim strip installed and TLR valve

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Formula DC22 (Black), Laser etched logo, M10x135mm - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick-Release binder included - Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

Upgrade or refresh your bike. When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. PRODUCT DETAILS - Original equipment replacement Bontrager Connection Disc wheels - Durable double-wall rim with 20mm internal, 26mm external width - Black rim graphics and spoke nipples - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 130mm - Wheel-Brake Comp. Rim - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 15mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Sora FH-RS300 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 20.2mm - Depth 16mm - Rim Model Mavic Open Elite - Skewers Included Yes

A tough, tubeless-compatible 29/700c disc wheel built around Center Lock hubs and shipped with handy 6-Bolt adaptors for dual compatibility straight out of the box. - Pinned construction, tubeless-ready, asymmetric/offset double-wall rim with 24mm internal width is suited to a wide range of tire widths perfect for either MTB or urban use - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech 100mm OLD alloy QR Center Lock hub w/serviceable cup and cone bearings - Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1003g

An affordable freewheel-compatible wheel with a durable 36H single wall construction and premium Stainless Steel spokes to fit older/classic road bikes built around the 27-inch (630mm ISO) wheel size. - Compatible with both 27 x 1-1/4 and 27 x 1-3/8 tires (same ETRTO - 630mm) - Alex Rims AP18 pinned construction classic box-section single-wall rim brushed sidewalls a generous 18mm internal width for compatibility with a wide range of tire widths - Joytech nutted steel hubs w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (6/7sp compatible) — axle can be respaced for 5sp compatibility - Straight gauge 2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1313g

A tough, tubeless-compatible 26-inch disc wheelset built around Center Lock hubs but shipped with handy 6-Bolt adapters for dual compatibility straight out of the box. - Pinned construction, tubeless-ready, asymmetric/offset double-wall rim with 24mm internal width is suited to a wide range of tire widths perfect for either MTB or urban use - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech 135mm OLD alloy QR Center Lock hub w/serviceable cup and cone bearings - Shimano freehub: 8/9/10/11sp MTB compatibility - Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1132g

An affordable wheel with a durable 36H single wall construction and premium Stainless Steel spokes to fit older/classic road bikes built around the 26 x 1-3/8(590mm ISO) wheel size. - Alex Rims X404 pinned construction classic box-section single-wall rim w/brushed sidewalls - Generous 20mm internal width for compatibility with a wide range of tire widths - Joytech nutted steel hub w/serviceable cup and cone bearings - Hub uses smaller diameter 5/16" axle for compatibility with the smaller fork slots on older Raleigh 3-speeds (compatible with standard 9mm dia. dropouts also) - Straight gauge 2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1109g

A 700c 6-Bolt disc wheel that is perfectly suited to modern road, CX, or gravel disc applications. - A lightweight (470g), pinned construction double wall rim with new-school 21mm internal width and offset/asymmetrical construction for better triangulation of spoke angles and balance of tensions, resulting in a stronger, stiffer, and more reliable wheel. - Joytech alloy QR hubs w/serviceable cup and cone bearings - Conventional 6-Bolt disc compatible only - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (black) - 32H/3X lacing - Presta drilling - QR lever & high-pressure rim tape included - Not tubeless compatible - Weight: 1028g

- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims - Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger - Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel - M-pulse hubs - 250lb Recommended Maximum Rider Weight

Tough-yet-affordable 18-inch (355mm ISO) single wall BMX wheelset that uses a much higher build standard and materials than many original factory-equipped wheels. - Alex Y303 pinned construction single wall rim with 24mm internal width for excellent pairing with modern high-volume tires - Anodized brake track for clean looks - Joytech alloy nutted hubs w/serviceable cup-and-cone bearings - Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 758g

An affordable freewheel-compatible wheel with a durable 36H single wall construction and premium Stainless Steel spokes to fit older/classic road bikes built around the 26 x 1-3/8(590mm ISO) wheel size. - Alex Rims X404 pinned construction classic box-section single-wall rim w/brushed sidewalls - Generous 20mm internal width for compatibility with a wide range of tire widths - Joytech nutted steel hub w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (6/7sp compatible) (axle can be re-spaced for 5sp compatibility) - Straight gauge 2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1243g

An affordable and durable 29/700c rim brake wheelset with MTB hub spacing and thread-on freewheel compatibility that's perfectly suited to a wide range of applications from MTB through to urban/commute/trekking. - Alex Rims Z1000 pinned construction single wall rim with generous 20mm internal width suitable for a wide range of tire widths & brushed sidewall - Joytech alloy nutted hubs w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (7/8/9/10sp compatible) - Plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1149g

Zipp's 3ZERO MOTO carbon 27.5 enduro/trail wheel is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

Rims: WTB CZR i23 Carbon 700C - ETRTO 622-23 - Inner width: 23mm - Torayca T700 UD carbon fiber for stiffness and compliance - Asymetric and angled spoke hole drilling - Externally reinforced spoke bed - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - 28 holes Front hub: Shimano HB-RS770 Ultegra series - 12x100mm E-THRU (Axle not included) - Center Lock (6-Bolt adapter included) - Polished angular contact bearings - Contact sealed hub Rear hub: Shimano FH-RS770 Ultegra series - 12x142mm E-THRU (Axle not included) - Center Lock (6-Bolt adapter included) - Polished angular contact bearings - Contact sealed hub and freehub body - Compatible with 11 speed Road (10 speed compatibility requires 1.85mm spacer, not included) Sold in Pair, including: - Tubeless Valve (x2) Assembled in North America by experienced wheelbuilders with Sapim Race Butted Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples

- A high-performance alloy rim designed for freeride, enduro, and downhill race use - Tubeless-ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 28mm and outer width of 33mm to optimize tire spread and enhance traction - The corrugated rim center adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shot-peened finish to increase fatigue life and make it more durable