Fenders

The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers. - Rear fender expands for custom fit - Rubber fasteners mount to a variety of frame styles

These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle

Evo's Adjustable Rear MTB Fender is compatible with 24- and 26-inch wheels. Easy to install on your seatpost, it keeps you from getting sprayed with mud on sloppy trails. We like it for when we commute on mountain bikes, too.

Accessorize your ride while keeping yourself dry at the same time. - Front and rear full length fenders designed for use on Cruiser Ladies' 26-inch bicycles - Protects against splashes - Fits ONLY Electra Cruiser Men's' 26-inch Bicycles

Accessorize your ride while keeping yourself dry at the same time. - Front and rear full length fenders designed for use on Townie 26" bicycles ONLY - Fits both men's and ladies' 26" Townie models - Protects against splashes - WILL NOT FIT Tall Townie Mens Bicycles or 24" Townie bicycles

A pair of Electra's Townie Aluminum Fenders on your ride will let you pedal even in less-than-ideal conditions. They're made from durable, low-maintenance aluminum and offer full coverage so you'll arrive squeaky clean. All mounting hardware is included for quick and easy installation.

Ride in any weather The Bontrager NCS fender is everything you want in a fender. It installs in seconds, is available in a variety of sizes to fit various bikes, and offers full coverage to keep you dry. The no-cut design includes everything you need for easy installation and it even comes with an integrated Blendr rear light mount. Product details - Fully assembled fenders that install in minutes - Integrated rear Blendr light mount for use with Bontrager Flare lights - No-cut struts allow quick strut adjustment for proper tire clearance - Double-back strut on rear fender adds support and stability - Made of lightweight yet super-durable polycarbonate - Stainless steel hardware resists rust - Four sizes available to accommodate most bike and tire configurations

- Keeps your butt dry on wet roads - Easy to mount, requires no tools - Fits every standard rail saddle, also with carbon rails. - Suitable for tire widths between 23-35 mm - Looks incredible Doesn't matter how you ride, the Ass Saver will keep your butt dry and dramatically increase the comfort on cold and wet rides. The latest Ass Saver sports a new attachment system. Once fitted, simply fold up the tip of the Ass Saver and it will securely lock to the saddle rails. Best of all, this one looks cooler than all of the other fenders out there, because you want everyone to know where you get your bike on.

Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. Construction FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles 3.2 mm 100% Recycled stainless steel support stays Stainless steel hardware Mounting System FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp Expanded selection of stainless steel mounting bolt lengths Features Glossy inner layer finish resists dirt and grime build-up Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray 3M triangle rear logos enhance visibility Support stays spaced for maximum stiffness and frame compatibility Stays can be bent to accommodate unique mounting configurations Front fender equipped with safety stays to protect against objects becoming lodged in wheel Compatible with most Disc-Brake-equipped bikes Compatible with most Thru-Axle-equipped bikes Compatible with a wide range of suspension forks Wide range of tire compatibility Profile designed for optimal tire clearance Sold pre-assembled for quick mounting Lifetime warranty

Bikes have changed, and so should fenders. We threw traditional fender blueprints out the window and designed fenders that create solutions for problems that traditional fenders can’t. Our FLASCHEGUARD™ fenders are as close to ‘fit-everything’ as a fender can be. FLASCHEGUARD™ fenders are made from end-of-life water cooler bottles and use up to 75% less crude oil than virgin polycarbonate. For every tonne of FLASCHEGUARD™ material produced, almost a tonne of CO2 emissions is prevented. This means end of life plastic is kept out of landfills or incinerators. Because we’re trying to make every difference that we can, all of our stays are made from 100% recycled stainless steel. Construction FLASCHEGUARD™ recycled polycarbonate inner layer created from end-of-life water cooler bottles 3.2 mm 100% Recycled stainless steel support stays Stainless steel hardware Mounting System FRAMERUNNERS™ mounts (x2) for use on suspension forks, aero forks, forks with disc brakes, forks without eyelets, or almost any other area where eyelets do not exist AXLERUNNERS™ (x2) for use on quick-release frames and forks without eyelets Spacers (5 mm x 6 / 10 mm x 3) for fine-tuning of bikes with disc brakes and eyelets, and for bridge height adjustment on frames with vertical mounting hole Mount to seat stay bridge and fork crown via included assortment of bolts and nuts, or use included zip-ties to fasten via the slotted bridge clamp Expanded selection of stainless steel mounting bolt lengths Features Glossy inner layer finish resists dirt and grime build-up Extended fender lengths and duckbill mud flaps* keep feet dry, and eliminate rear spray 3M triangle rear logos enhance visibility Support stays spaced for maximum stiffness and frame compatibility Stays can be bent to accommodate unique mounting configurations Front fender equipped with safety stays to protect against objects becoming lodged in wheel Compatible with most Disc-Brake-equipped bikes Compatible with most Thru-Axle-equipped bikes Compatible with a wide range of suspension forks Wide range of tire compatibility Profile designed for optimal tire clearance Sold pre-assembled for quick mounting Lifetime warranty

Easy-to-install front fender for your fat bike. CONSTRUCTION • Virtually unbreakable polypropylene body MOUNTING SYSTEM • Adjustable rubber straps mount to down tube •100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket • Hardware included • Weight: 99 grams / 3.5 ounces

Axiom's Frontrunner Front Fender easily installs on your down tube with rubber straps. Axiom reduced the impact of their manufacturing and shipping methods by designing the Frontrunner to fold flat. It's also made of strong, 100% recyclable plastic. A minimalist front fender compatible with 26”, 650B and 29” wheel sizes. - Virtually unbreakable polypropylene body - Adjustable rubber straps mount to down tube - 100% recyclable; ships and merchandises as a flat sheet and snaps onto the included down tube bracket; hardware included

Axiom's Rackrunner Fender easily installs to your rear rack with the included hardware. Axiom reduced the impact of their manufacturing and shipping methods by designing the Rackrunner to fold flat. It's also made of strong, 100% recyclable plastic. The Rackrunner fits racks with or without platforms and can be trimmed to fit. A simple and elegant ‘instant fender’ add-on for pannier racks. - Virtually unbreakable polypropylene body - Mounts directly to rack tubing - 100% recyclable; can be trimmed to fit any rack; ships and merchandises as a flat sheet; hardware for mounting to racks with or without platforms

A sturdy, secure and highly visible set of full-coverage fenders designed to fit more bikes than any other full-coverage fender. Easy to install and easy to adjust, Rainrunners are a perfect way to install fenders on bikes that are not designed to accept fenders. Weight 610 g / 1.34 lbs (pair) Construction - Alloy/Engineering plastic FRAME-RUNNER mounts - 360 degree visibility 3M Reflex sides - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting system - Below: Mount on frame or fork via included Frame-Runners - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included FRAME-RUNNERS mount to almost any frame or fork to ‘create’ eyelets - FRAME-RUNNERS can be installed and removed easily via included O-rings, or permanently mounted using included zip-ties - 3M Reflex side panels offer 360 degrees of reflective visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Extended mudflaps keep feet dry and reduce rear spray - Sold pre-assembled for quick mounting - Compatible with most disc-brake-equipped bikes

A sturdy, secure and highly visible set of full-coverage fenders designed to fit more bikes than any other full-coverage fender. Easy to install and easy to adjust, Rainrunners are a perfect way to install fenders on bikes that are not designed to accept fenders. These fenders are easily mountable with either O-rings or the included zip ties, and are compatible with most disc brake-equipped bikes. Weight 575 g / 1.26 lbs (pair) Mounting system - Below: Mount on frame or fork via included Frame-Runners - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Construction - Alloy/Engineering plastic FRAME-RUNNER mounts - 360 degree visibility 3M Reflex sides - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Added Benefit - Included FRAME-RUNNERS mount to almost any frame or fork to ‘create’ eyelets - FRAME-RUNNERS can be installed and removed easily via included O-rings, or permanently mounted using included zip-ties - 3M Reflex side panels offer 360 degrees of reflective visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Extended mudflaps keep feet dry and reduce rear spray - Sold pre-assembled for quick mounting - Compatible with most disc-brake-equipped bikes

Easy-to-install rear fender for your fat bike. CONSTRUCTION • Virtually unbreakable polypropylene body MOUNTING SYSTEM • Adjustable rubber straps mount to down tube • 100% recyclable • Ships and merchandises as a flat sheet and snaps onto the included seat tube bracket • Hardware included • Weight: 190 grams / 6.7 ounces

Axiom's Rearrunner Rear Fender easily installs to your seatpost with a quick-release bracket. Axiom reduced the impact of their manufacturing and shipping methods by designing the rearrunner to fold flat. It's also made of strong, 100% recyclable plastic. A minimalist rear fender compatible with 26”, 650B and 29” wheel sizes - Virtually unbreakable polypropylene body - Adjustable Boa Bracket fits all seatpost/seat tube diameters - 100% recyclable; hardware included

A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 652 g / 1.44 lbs (pair) Construction - Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System - Below: Mount to Quick-Release skewers via included AXLE-RUNNERS - Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting

A sturdy, secure set of full-coverage fenders designed to fit more bikes than any fenders in their class. Easy to install and easy to adjust, Roadrunners are a favorite of both cyclists and shop mechanics. Weight: 606 g / 1.34 lbs (pair) Construction -Forged alloy RAINRUNNER Q/R mounts - 3M Reflex rear reflectivity - Virtually unbreakable Techniflex body - Stainless steel stays - Safety front stays Mounting System Below: Mount to Quick-Release skewers via included AXLE-RUNNERS Above: Mount to brake bridge and fork crown via included nut and bolt or with zip ties Added Benefit - Included proprietary AXLE-RUNNERS mount to almost any front or rear Q/R skewer to “create” eyelets - 3M Reflex rear logo enhances visibility - Support stays spaced for maximum stiffness and frame compatibility - Front fenders equipped with safety stays to protect against objects becoming lodged in wheel - Sold pre-assembled for quick mounting

Axiom's Roadrunner LX Reflex 29er Fenders offer excellent protection from the rain and are made of super-durable Techniflex plastic that resists breakage even in sub-freezing conditions. There are mud flaps on the bottom of both fenders for additional protection for you and your riding buddies. And these fenders help keep you safe with gray-by-day, reflective-by-night 3M Reflex stripes down the center. These fine fenders also feature rustproof stainless-steel stays.

Axiom's Roadrunner LX Reflex Fenders are made of super-durable Techniflex plastic that resists breakage even in sub-freezing conditions. Their mud flaps keep you clean and the gray by day, reflective by night 3M Reflex strips keep you safe. And, they also feature sturdy, easy-to-install stainless steel stays.

This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 35cm / 13.8" (in length) - Weight: 68g / 2.40oz

Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.

Topeak's DeFender M3 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.

Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - Clamp Diameter: Universal, endless strap type - Quick release allows DeFender to be installed and removed in seconds - Rear angle adjustable - Injected molded nylon - Dimensions (L x W x H): 22 x 4 x 6" - Weight: 226 grams

Topeak's RX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and road grime.

Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.

Designed specifically for commuters, this 45mm wide front and rear fender set is the perfect option for the every day rider. The reflective strips that run down either side of the fenders provides enhanced visibility. - Sturdy stainless steel double stays - Easily mounted with included hardware

Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.