Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Chainrings

absoluteBLACK Oval Direct Mount Chainring for SRAM and Hyperglide+
$118.99 - $119.99
absoluteBLACK 1x Oval Direct Mount Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider and will only work with 12-speed Hyperglide+ chains. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - This chainring will only work with Shimano Hyperglide+ CN-M9100, 8100, and 7100 chains due to the different thickness of the teeth - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - 3mm offset converts any SRAM crank into Boost setup needed on Boost-spaced bikes - Designed for GXP, DUB, and long-spindle BB30 cranks - Provides excellent weight-to-strength ratio - 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/long-spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks
Shimano Alivio M415 7/8-Speed Middle Chainring
$25.99 - $29.99
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
Shimano Deore XT M770 10-Speed Outer Chainring
$112.99
Shimano XT M770 10-Speed Outer Chainring - Chainring BCD: 104 - Color: Black - Drivetrain Speeds: 10 - Material: Aluminum - Ring Position/Type: Outer - Tooth Count: 42
Shimano XT 1x Direct Mount Chainring for M8100/8130 Cranks
$84.99 - $89.99
The Shimano Deore XT SM-CRM85 chainring is designed for use with Shimano's M8100 and M8130 1x cranksets. - Special MTB gear tooth profile with Dynamic Chain Engagement+ improves chain engagement and retention - Direct Mount Type: Direct Mount Shimano - Tooth Count: 28T, 30T, 36T - Drivetrain Speeds: 12 - Defined Color: Black - Ring Position/Type: Chain-Retaining Single Ring - Round or Oval: Round - Chainline/Hub Compatibility: 141/148 Boost Hubs , 157 Super Boost Hubs
Race Face CX - Narrow Wide
$59.99 - $89.99
- Narrow Wide tooth profiling ensures ultimate chain retention - Stiff 4mm plate thickness and I-beam construction transfer loads without flexing - 7075-T6 aluminum, aerospace grade strength - Reversible laser etched graphics - 9, 10, 11 and 12 speed compatible
Race Face Cinch Direct Mount Narrow-Wide Chainring
$84.99 - $99.99
Race Face Next SL Direct Mount Chainrings • 7075-T6 aluminum, aerospace grade strength • Compatible for 9, 10, and 11 speed • Narrow Wide tooth profiling ensures ultimate chain retention • Attaches as part of the Race Face CINCH system (using tool TL6800) allowing you to switch between Direct Mount rings/spiders with ease • Utilizes Race Face proprietary spline design • Stiff 4mm plate thickness to transfer loads without flexing • 41 grams (26T) ranging up to 82 grams (36T) • Compatible with Race Face cranks with CINCH system interface
Race Face Narrow-Wide Chainring
$56.99 - $79.99
Race Face Narrow-Wide Single Chainrings for 9-11 speed drivetrains. • 7075-T6 aluminum, aerospace grade strength. • Compatible with 9, 10, and 11 speed • Narrow Wide tooth profiling ensures ultimate chain retention • Stiff 4mm plate thickness and I-beam construction transfer loads without flexing • Reversible laser etched graphics • 36t = 50g
Race Face Narrow-Wide Direct Mount 3-Bolt Chainring
$84.99
Direct Mount 3-bolt chainrings compatible with SRAM cranksets with a removable Spider. Narrow Wide tooth profiling ensures ultimate chain retention. - 7075-T6 aluminum, aerospace grade strength - Stiff 4mm plate thickness to transfer loads without flexing
Race Face Narrow-Wide Single Chainring
$56.99 - $79.99
Race Face Narrow-Wide Single Chainrings for 9-11 speed drivetrains. - 7075-T6 aluminum, aerospace grade strength. - Compatible with 9, 10, and 11 speed - Narrow Wide tooth profiling ensures ultimate chain retention - Stiff 4mm plate thickness and I-beam construction transfer loads without flexing - Reversible laser etched graphics - 36t = 50g - 30t Narrow-Wide single rings are threaded with a standard M8 x 0.75 chainring bolt thread
Race Face Team Chainring, 9-speed
$24.95 - $69.99
• CNC machined in British Columbia, Canada • S.H.I.F.T technology features sloped ramps, profiled teeth and pins • AL7075-76 rings with hardwearing steel ramps • Black machined and anodized
Race Face Turbine 10-Speed Chainring
$34.99
• New asymmetrical tooth profiling and more upshift and downshift zones yield instantaneous, smooth and quiet shifting • CNC-machined from super-hard AL-7075 to maximize wear resistance and impact strength • Three times stiffer than Team and Race rings • 3x10 chainrings are compatible with 9-speed drivetrains if a complete set is used
FSA Afterburner MTB ABS Chainring
$29.99
FSA ATB and Pro ATB chainrings deliver flawless shifting. - Precision CNC-machined AL7075/T6 - Shifting ramps and SS pins - Material: Aluminum - Tooth Count: 36 - Ring Position/Type: Inner - Drivetrain Speeds: 11 - Chainring BCD: 96mm
FSA Omega/Vero Pro Road Double Chainring
$29.99 - $59.99
Shifting performance has helped Full Speed Ahead to become a world leader for high-end chainrings. No one studies the design and manufacturing of each system, and each tooth, as carefully as we do. Our dedication shows in every revolution of the crank, and every perfect shift achieved. To meet or exceed the needs of any drivetrain, Full Speed Ahead has developed sophisticated design, testing and manufacturing protocols. This allows Full Speed Ahead to match your needs as perfectly as our chainrings match a chain. We offer more options, levels, and finishes than our competitors. We use the best materials available, imported from the USA, Europe, or sourced from our qualified vendors in Asia, to guarantee the durability, performance, and appearance will out-perform, and outlast the competition. Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations. - Stamped AL7075/T6 - Chainrings are compatible with all 10-speed drivetrains, and compatible with FSA, SRAM, and Shimano 11-speed drivetrains - Drivetrain Speeds: 11, 10
e*thirteen by The Hive Guidering M (Narrow/Wide) Chainring
$66.99
- Guidering M to fit any 4x104mm BCD crank - Dual width "M" (narrow/wide) tooth profile engages the chain securely even at extreme angles - 7075-T6 aluminum construction optimized for all chainguide systems to prevent chain jamming - 1mm swappable chainline
Wolf Tooth Components 110 BCD Asymmetric 4-Bolt for Shimano Cranks
$129.99 - $139.99
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 5-Spoke GXP Direct Mount Ring
$114.99
Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM chainring. There are 3 offsets: 0mm, 3mm, and 6mm - 49mm chainline, 0mm offset for BB30 short-spindle cranks - 52mm chainline, 3mm offset BB30 - 47mm chainline, 6mm offset for cyclocross and road cranks - 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost Notes for use with Fat Bikes: - If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. - If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset
Wolf Tooth Components 64/104 Chainring
$94.99 - $109.99
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)
Wolf Tooth Components Direct Mount Boost Chainring for Race Face Cinch
$114.99
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Direct Mount Boost Chainrings for SRAM
$114.99
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets, including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
Wolf Tooth Components Direct Mount Chainrings for Race Face Cinch
$114.99
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Elliptical Direct Mount Boost Chainrings for SRAM Cranks
$114.99
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
Wolf Tooth Components Shimano 104 BCD Chainring
$114.99 - $119.99
104 BCD is the most common bolt pattern on double and triple cranksets and happens to be the first product ever made my Wolf Tooth Components. The Drop-Stop tooth design is the best performing and longest-lasting wide/narrow chainrings on the market. Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side, which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris, which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility: - Fits any 104 BCD crankset - Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long, with exception to 30T rings, which are threaded and require bolts that are 7-10mm long - If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm) - 32T 104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore) - All sizes of 104 BCD chainrings are compatible with QUARQ power meters - Drivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrains - If using a 9-speed drivetrain, use a 10-speed chain. It fits tighter for better chain retention Specifications: - Mount type: 104 BCD - Chain Compatibility: Drop-Stop ST for Shimano 12spd Hyperglide+ chains
Wolf Tooth Components Shimano M9000/M9020 Chainring
$109.99
- Fits asymmetrical 96mm BCD with built-in threaded standoffs - Used on Shimano XTR M9000 and M9020 crankset (both race and trail models) - Features Drop-Stop tooth design to prevent unwanted chain drop - Mount using the stock Shimano XTR M7 chainring bolts - 49mm chainline for 28-34 tooth and 50mm for 36 tooth - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy - 41g (30t)
Wheels Manufacturing Inc. Individual Chainring Spacer
$25.99 - $29.99
- For chain and derailleur alignment - 20 per bag
TruVativ 10-speed Chainring for Specialized 24/36T Crankset
$96.00
- Designed for for Specialized 24/36T Crankset - Drivetrain Speeds: 2 x 10 - 104mm BCD
TruVativ Aluminum Chainring
$34.99
Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - Middle chainring, use with 48T outer - 64mm BCD
TruVativ GX Chainring
$21.00 - $133.00
Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - Material: Aluminum
TruVativ Trushift Alloy Chainring
$37.00 - $120.00
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains. - 104mm BCD - Material: Aluminum
TruVativ Trushift Steel Chainring
$31.00
- Trushift chainrings feature shift ramps and pins - Drivetrain compatibility: 8, 9, 10, 11 - 104mm BCD
TruVativ X0DH Chainring
$74.99
- For 1x10 drivetrains - 104mm BCD - Material: Aluminum
Page 1 of 6 Next page