Lighting

Lezyne's Infinite Light Power Pack is a portable power pack that doubles runtimes of compatible Lezyne LED units. Compact, versatile design quickly and securely mounts to bars and frames. Integrated cable plugs directly into lighting systems. Power pack doubles as a backup USB charger for compatible USB rechargeable accessories. 20 Wh capacity. 14-inch cable with adjustable Velcro strap.

With 2 LEDs pumping out 65 lumens of power, 270 degrees of visibility, and Blackburn's unique BLITZ daytime running mode, the DAYBLAZER 65 is focused on safety, so you can focus on your ride. Also, because of the narrow profile of our unique mounting bracket, the DAYBLAZER 65 tail light can be mounted to just about anything you can think of from round or aero seat posts, to seat stays, to a rear rack, or your back pack - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-67 standard - TIR Lenses - LED Fuel Gauge/Charge Indicator - Polycarbonite Construction - 2 hour recharge time - Runtime: Solid 1.6hrs (50 lumen), High Flash/Low Strobe 3hrs (65 lumen)/6hrs (35 lumen) - 48g

Tool-Free design fits 22-34mm handlebars - 2 x 10,000 MCD White LEDs - Constant (30 hrs), Chasing mode (55 hrs), Flashing mode (80 hrs) - Water resistant - CR2032 3V batteries (x2) included

Take the lane with the confidence you're using the strongest tail light Blackburn's ever made. Featuring 3 focused LEDs, 270 degrees of visibility, and the 125-lumen BLITZ daytime running mode, the DAYBLAZER has all of your ride needs covered. Also, because of the narrow profile of the light and its unique mounting bracket, the DAYBLAZER 125 tail light can be mounted to just about anything you can think of from round or aero seatposts, to seat stays, to a rear rack, or your back pack. - Charging cable included, no tools required - Lithium-ion battery - Waterproof to IP-67 standard - TIR Lens - LED Fuel Gauge/Charge Indicator - Aluminum Construction - 3 hour recharge time - Runtime Solid: High 1.6hrs (120 lumen), Low 3 hrs (50 lumen) - Runtime Flash/Strobe: 3hrs (125 lumen)/6 hrs (65 lumen) - 78g

Pro Series Low Profile Helmet Mount (Not for Lumina Series Lights) System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip -TrailRat & TrailRat Select - RoadRat - Digital Patrol - Pre 2001 Systems

Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights

CatEye combo set featuring the EL135 headlight and Orb LD160 tail light Headlight: EL135: The HL-EL135 with three LEDs and OptiCube lens technology for a wider, 150 candlepower beam is the perfect everyday commuter safety light. - 3 white LEDs - AA alkaline battery x 2 - 2 modes - FlexTight H-34N bracket Tail light: Orb LD160: The ORB pairs a sleek, compact design housed in an alloy chassis. The lens itself serves as the operating switch and is protected from inadvertent triggers while still allowing for side visibility. - Simple, compact and lightweight - Easy switch operation - Side visibility - Attaches to seatpost, helmet or bag with the heavy-duty rubber band - CR2032 battery x 2 - Long runtime - 3 modes

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultra-high-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. *Direct X-Lock Mounting System not compatible with all stems. Please see installation manual for stem compatibility. Specs - Max Lumens: 500 - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98"

Small, compact, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - Simple, lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Battery type: CR2032 x2 - Mount size: ~22-32mm Modes/Run Time - Constant: 50 hours - Rapid flashing: 100 hours - Slow flashing: 100 hours

Lights, Camera, You Name it The Accessory Mount is a great solution for attaching your GoPro-style mount to your helmet, seatpost, handlebar, selfie-stick or just about anything else. The banded system offers easy attachment, the 270 degree rotation helps you position your camera so that you can get the shot every time, and the omni-directional breakaway feature will take the hit in a crash (possibly saving your camera equipment). With the Accessory Mount, your imagination is the only thing holding you back. Features - Omni-directional breakaway, 270 Degree Rotation

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series

AMPP200 200 lumen USB rechargeable light with excellent side visibility. A versatile rubber strap allows for quick and easy attachment/removal from the handlebar. - Compact rechargeable headlight (200 lm) - Easy to attach and remove, new rubber strap mount - Excellent side visibility - Low battery indicator - USB rechargeable (Micro-USB cable included) - Mode memory function - Three light modes (High / Low / Flashing) - Turns on Flashing mode with double-click of power button Run time: - High mode 200 lumens:approx 1.5hrs - Low mode 40 lumens:approx 13hrs - Flashing mode 200 lumens:approx 30hrs ORM Rechargeable Look no further than the ORB rear light. It's compact, lightweight and neat. With varying flashing modes, the ORB Rechargeable helps you to be seen out on the road. - Lens functions as push-button - USB rechargeable - 3 modes *Charging time: 3.5h - Robust aluminum body - Versatile rubber strap mount Run time: - Rapid flashing :approx 5 hrs - Slow flashing :approx 5 hrs - Constant :approx 2.5 hrs

Grid Front and Rear Lights have four mode options, you can choose if you need high lumen power or extended run time. A complete set ready for those commuting in the city, riding the open roads, or heading to their local trail. The Grid Light Set offers plenty of rechargeable power to keep you visible while out riding. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C-Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tell you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

GoPro/Garmin helmet and head mount with straps, compatible with GoPro action cameras, bike lights, etc. GoPro base piece with an additional.GoPro to Garmin adapteron top for compatibility with all Garmin quarter turn style devices. Included are rigid helmet straps and stretchy head bands for head mounting.

SEEMEE SEATPOST MOUNT for Magicshine Seemee 60, 100, 180, and 200. Including an adjustable silicon seat-post mount.

Replacement Part – Aero Headlight Bracket - Works For Both Headlights & Tail Lights - 3 Strap Sizes Allows Fitting From 20mm To Over 100mm - Adjusts To Fit Aero & Round Seat Posts & Handlebars - Fits All Serfas Headlights Except: USL-200 & USL-450

Replacement Part – TST Tail Light Belt Clip Improved design keeps light more secure on belt or bag strap. Compatible With: TST-70 TST-100 TST-150 TBT-50R TBT-120F

For CubiCubi 1200 Lighthead - Cartridge battery - 1200 Lumens / 6000 mAh battery - Charge phone and other devices with USB charge cable - Recharge via a micro-USB cable

The 49n Doppler lights are perfect for providing quick mount visibility. With 2-bright LEDs per light and a highly versatile silicone multi-mount body, the Doppler lights make it easy to improve your visibility and safety in seconds. Super Doppler Specifications Front: 2 LEDs producing 8 Lumen - 3 Modes: - Strobe 272 Hour burn time - Flash 343 Hour burn time - Steady On 334 Hour burn time Rear: 3.5 Lumen output - 3 Modes: - Strobe 204 Hour burn time - Flash 270 Hour burn time - Steady On 238 Hour burn time - Super Doppler Common Features - Quick release, multi-mount silicone body - IPX3 Waterproof rating - 2 x CR2032 batteries per light (included) - Fits all bar and seatpost diameters - 40 grams / pair - Black body (Front Clear lens, Rear Red lens)

With the included elastic arm band, the 49N Wazoo multi-mount light can be attached to virtually anything! The integrated clip mount can be used on bags, baskets, or clothes. The included seatpost mount rounds out the mounting options for this light. Wazoo Specifications and Features - 4 Red LEDs with 5 Lumen Output 3 Modes: - Steady 111 Hour burn time - Flash 89.5 Hour burn time - Strobe 98 Hour burn time - Built in reflector - Clothing clip on back of light - Includes elastic arm band - Includes seat post mount (25.4 31.8 mm) - IPX3 Waterproof rating - 2 x CR2032 batteries (included) - Black body and red lens - 50 grams

For CubiCubi 500 / 850 / 1200 - Charges two batteries simultaneously

Topeak WhiteLite 800 BT is a high-powered 800-lumen front light with four brightness levels. USB rechargeable with Bluetooth 5.0 enabled wireless control and features a built-in remote control button for compatible rear light and can also be wirelessly controlled by TetraBand BT. The Dual Zone refractor lens allows clear near and far visibility by focusing the main beam downward to prevent blinding pedestrians or oncoming traffic. Optical enhancements increase side visibility for safety on your night rides. Included handlebar mount and adapters provide mounting flexibility. - 5 modes (High 80 lm - 2.5hrs / Middle 40 lm - 5 hr / Low 20 lm - 6 hr / Blink 30 lm - 20 hr / Pulse 50 lm - 40 hr) - Cree XP-L2 LED provides up to 800 lumens - Dual zone refractor lens, low battery indicator

Charged to be seen! The TailLux 25 USB design features convenient cable-free charging with a direct USB port plug. Two super-bright LEDs provide 25 lumens and three light modes, so you can be seen up to 2km away—even on the darkest nights. Bi-directional tool-free mounting and removal are accomplished by a single silicone strap, making it simple to use on seatposts, seatstays, or Topeak bags. - Max Luminous Intensity: 25 Lumens - Lamp: 2 super bright red LED's - Light Housing: Engineering grade polymer - Battery: 3.7 V 320mAh Lithium Ion (integrated) - Control/Burn Time: 3 modes / 3 hr (High) / 30 hr (Low) / 40 hr (Blinking) - Charging: USB port / 2 hr - Mounting: Fits aero or round seatposts (25.4 – 34.9mm), seatstay, and Topeak bags - Waterproof IPX 6 - Size: 6.3 x 2.7 x 2.5cm / 2.5" x 1.1" x 1" - Weight: 30g / 1.06oz (w/ mounting clip)

Easily integrated Designed specifically for specific Bontrager Rally MIPS mountain bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount light and camera accessories on top of your Bontrager Rally MIPS mountain bike helmet - Tested with accelerometer for intended breakaway point if involved in a crash

Being Seen From All Angles Has Never Been Easier We understand being able to see in the dark is important, but we also believe that so is being visible to cars. A recent study by the National Highway Traffic Safety Administration (NHTSA) showed 27% of bicycle accidents are side impacts and 30% of fatalities occur in intersections (between 2010-2017). With the Luminate 360 set, being seen from all angles while cycling has never been easier. The grid side beacon was imagined to work in with head/tail lights to keep you more visible from a full 360 degrees. While the grid side beacon can be used as a stand alone light, we believe it works best as part of our Luminate 360 light set. The Dayblazer 400 front light and the 65 rear are spec'd with blitz mode to keep you bright enough to be seen, day or night. - 165 grams (140 front, 48 rear, 58 side) - 4 Lithium polymer/lithium ion batteries included - Rear: Solid 50 lumen, 1.6 hr runtime; High Flash 65 lumen, 3 hr runtime; Low Strobe 35 lumen, 6 hr runtime - Side: High/Solid 85 lumen, 1.5 hr runtime; Low/Solid 50 lumen, 3 hr runtime; High/Flash 85 lumen, 3 hr runtime; Low/Strobe 50 lumen 6 hr runtime - Front: Blitz 400 lumen, 1 hr runtime; Low 200 lumen, 1.5 hr runtime; Pulse 200 lumen, 6 hr runtime; Strobe 200 lumen, 10 hr runtime - Charges via any standard USB port (charging cable included) - IP-65 Submersible - ingress protection rating or "IP rating," is a techy way to describe the level of water- and dust-proofness of a product. This light meets the IP-65 standard, which means it is totally protected against dust/grit and protected against low-pressure water jets from any direction.

The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt

If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. System Compatibility - Lumina Series - Mako Series

Head and Tail Light features: - off-constant-flash-chasing - 2 x CR2032 (3V Lithium) bat. incl. - 40/80 hours of burn time (constant/flash) - 600m visibility

Little light, lots of bright. Illuminate the Grid, or your path off it. The Grid Rear Light has four mode options so you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid Rear Lights offer plenty of rechargeable power to keep you visible while out riding. COB LEDS — Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. ECO MODE — Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. USB-C — Modern USB plug standard to ensure you can stay charged and ready to ride BATTERY GAUGE — Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0%