Accessories/Parts

Expand the food prep zone on your EXO OpenRange with this bamboo wood side table and nesting cutting board. PRODUCT DETAILS - 13" x 27" UV protected Bamboo table with a premium finish - Height-adjustable support leg (26-44"), to level out the table - Includes plastic cutting board and collapsible wash basin with drain hose that nests into the table surface cutout - Included storage bag protects the side table when not in use and can be stowed inside OpenRange PRODUCT SPECS - Weight: 5.50 lbs. - Dimensions: L 27.00 in x W 13.00 in x H 0.50 in - Limited Two Year Warranty

From protecting your precious cargo with padding and less sliding around to removing melted snow at the bottom of your box, give your gear some extra love with this custom-molded cargo box floor liner for your SkyBox NX 18 - Molded Liner fits snugly in SkyBox 18 NX - Added protection for ski edges and other cargo - Easy removal for simple clean up

Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in

Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Landing Pad designed to fit a variety of BMW vehicles with fixed 7mm threaded mounting points. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2020+ Toyota Highlander. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 30 7/8" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed Product Specs: - Weight: 1.38 lbs.

Attaches SkyLine Towers or Control Towers to many popular factory luggage rack tracks. PRODUCT DETAILS - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal “C” anchor plates 1-3/16” x 13/16” (Contact Yakima Customer Service for additional size anchor plates) PRODUCT SPECS - Weight: 0.60 lbs.

Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2021+ Nissan Rogue. Combine with SkyLine Towers and StreamLine crossbars for a full featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required. - Snap on covers to keep the elements out while the rack is removed

From protecting your precious cargo with padding and less sliding around to removing melted snow at the bottom of your box, give your gear some extra love with this custom-molded cargo box floor liner for your SkyBox NX 16 - Molded Liner fits snugly in SkyBox 16 NX - Added protection for ski edges and other cargo - Easy removal for simple clean up

The Hi-Lo Pro takes our Hi-Lo to the next level. We have added our proprietary Flat-lock hitch cam that ensures a zero-wobble user experience. We have also included our fully redesigned hitch lock. - Hi-Lo Pro is a 2” hitch extension (works with 2” hitch receivers) with a 250 lb. weight limit - Provides 2" of drop or 2" of rise to the vehicle receiver - Provides 10” of Hitch Extension - Matte Black with black water transfer logos - Patent Pending - No Worries Warranty - Approved for use with the NV 2.0 (including NV 2.0 Add-On), Base 2.0 (including NV Base 2.0 Add-on) Sherpa 2.0, Transfer family, and the original NV 2” 2-bike only

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. - Fits Mitsubishi Outlander 5-dr SUV with Flush Rails 2014 – 2020

These 12' locking multi-purpose cargo straps are a must-have accessory for anyone with a rack. Lock anything from surfboards and boats to bikes and motorcycles. Even strap and lockdown ladders and other gear. You'll wonder how you ever lived without them.

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 8 SKS Cores and matching keys - 2 keys included plus a control key

A permanently mounted bracket that allows 1A Raingutter Towers or Q Towers to be used in some situations where no raingutters exist. Installed with carriage bolts, washers, and lock nuts. - Stainless steel hardware included - If you are attempting to use QTowers and our bolt top loader for your vehicle you will need a pair of Q41 clips, sold separately. - Sold as pairs Product Specs: - Weight: 1.00 lbs. - Dimensions: L 7.10 in x W 2.50 in x H 0.75 in - Limited Lifetime Warranty

Load up and secure bulky gear with this set of heavy-duty adjustable brackets for the LockNLoad platform rack. Designed to hold just about any hard-shelled container-including coolers, storage bins, or even a toolbox—these brackets provide peace of mind for carrying gear on any rugged adventure. The drop-in style T-slot eyebolts make them easy to install and adjust, and they pair well with Yakima Heavy-Duty Straps or other tie downs (sold separately). Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Secures hard-shelled containers up to 3' tall and 110 lbs./50 kg. - Heavy-duty stamped-steel construction, with a durable black-zinc coating. - Easily installs in minutes on the LockNLoad platform rack and most other T-slot equipped platforms. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Packaged as a set of 4 brackets, easily pairs with our Heavy-Duty Tie Down Straps (sold separately). Product Specs: - Weight: 5.00 lbs - Dimensions: L 4.50in x W 4.00in x H 3.75in - Some assembly required, 15 minute install

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar

Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar

The LongArm Height Extension takes your LongArm truck bed extender to the next level. It securely attaches to the LongArm when it's in the vertical position and easily adjusts to match the height of your cab's roof rack. The 165-pound capacity allows for a couple of kayaks or ladders to go up high on your truck, leaving room in your truck bed for other gear, and the included anchor strap tie-downs ensure the load is secure. - Extends your LongArm truck bed extender up to cab height to carry longer loads up to 165 lb - Fully adjustable in height to match your cab's roof rack perfectly - Maintains truck bed space for other gear while still enabling longer loads to be carried such as a fishing kayak, canoe, ladders, lumber and more - Aluminum construction engineered for strength - Durable black powder-coat finish - Included anchor straps secure the LongArm, preventing side to side movement Product Specs: - Weight: 3.00 lbs. - Dimensions: L 2.50 in x W 2.00 in x H 28.25 in - Limited Lifetime Warranty

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Trail Doc accessory kit for the NV Base 2.0 rack from Kuat Racks.

No awkward loading here. Loading heavy bikes on the StageTwo family of racks is no problem with the RampUp, just lock the ramp in place and roll your bike up onto the tray. - Ramp interlocks to the end of the StageTwo family trays - Provides Loading assistance for heavy bikes - Durable Aluminum construction - Please remove during transportation PRODUCT SPECS - Weight: 3.92 lbs.

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key

The Access Bike Ramp makes it easy to load your bike onto your Kuat NV 2.0 hitch rack.

Increases weight capacity (fit permitting) to LockNLoad platforms by facilitating the addition of a 3rd crossbar or pair of towers to LockNLoad platform sizes K and B. Or, a 4th crossbar or pair of towers to be added to LockNLoad platform sizes J, N, E, and H. - Adds weight capacity potential to LockNLoad Platforms - Replacement Pivot Mounts and Pivot mount hardware Product Specs: - Weight: 2.76 lbs.

RackDock from Kuat. A sophisticated solution for storing your hitch rack. Easy wall installation and the ability to hold up to 100lbs keeps your hitch rack secure and out of the way in the garage, preventing damage to the rack, cars, and of course—bikes. - Supports up to a 4-bike rack (100 lb max) - All hardware included - 2" hitch and 1.25" hitch adaptor included - Magnetic faceplate

High-grade bike lock developed with ABUS High-quality lock for added security and protection against theft, developed with ABUS. The robust cable has a length of 150 cm and a thickness of 1,2 cm. The lock is compatible with both the two-bike and the three-bike carrier. Maximum security High grade bike lock with loop cable offers added security High quality bike lock for your bikes Developed with ABUS Easy to install Tool-free installation of lock to bike carrier

Yakima's 1A HighRise Spacers convert their standard 1A RainGutter Towers (sold separately) into HighRise towers for more clearance. They give a rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks).