Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Accessories/Parts

Yakima Holdup Wheelstrap
$5.99
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Yakima CoreBar EndCaps
$9.99
Pair of EndCaps for Yakima CoreBar.
Yakima FrontLoader Tensioning Handle
$9.99
Tensioning handle for FrontLoader universal bike mount. Includes one handle.
Yakima JetStream EndCaps
$9.99
Pair of EndCaps for Yakima JetStream bars.
Yakima Single SKS Key
$9.99
Includes a single SKS key.
Yakima 8 Hole Chainstraps
$11.99
Chainstraps for a multitude of rear of car bike racks.
Yakima Sidewinder Strap Pad
$13.99
Spare part for SideWinder
Yakima EndCaps for 86-inch Load Bars
$19.99
Yakima Load Bar End Caps. - For 86" load bars only
Yakima Frontloader Tensioning Knob
$19.99
Replacement red tensioning knob for Frontloader
Yakima Fat Straps
$24.99
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - L 15.50" x W 1.00"
Yakima Single SKS Lock Core
$24.99
SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.
Yakima LockNLoad SL Adapter, 2-pack
$29.99
Use these adapters to attach the LockNLoad platform directly to the Yakima TimberLine and SkyLine towers. They eliminate the need for a traditional crossbar, and put the platform lower and closer to the roof-giving your rig a clean, customized look. One pair of LockNLoad SL Adapters required for each pair of towers. Check your vehicle fit to verify requirements Product Details: - Sold as a set of 2 adapters with included hardware to attach to 2 Yakima TimberLine or SkyLine towers (towers sold separately). - Structural steel brackets with powder-coat finish for durability and resistance to the elements. - The LockNLoad platform requires 2 or 3 sets of adapters (check your vehicle's and platform's fit requirements for number of adapters needed). - Only compatible with Yakima SkyLine and TimberLine towers. - Each set of adapters adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of adapters and towers. Never exceed the Yakima-specified weight limit for your vehicle. Product Specs: - Weight: 0.50 lbs - Some assembly required, 60 minute install
Yakima Timberline 2.0 Strap Kit
$29.99
TimberLine Strap Kit, (2017)
Yakima Felt Pads (Sweetroll/ Hullhound)
$34.99
These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.
Yakima Hood Anchor
$34.99
Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place. Product Details - Creates a secure attachment point for bow and stern tie downs - Fits easily under a hood, hatch or trunk - Installation is simple - just drop them in place - Durable coated strap protects your vehicle's paint - Sold as a pair Technical Specs - Weight: 0.43 lbs - Dimensions: L 6.50in x W 2.00in x H 10.12in
Yakima LongArm Pad
$34.99
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage -Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in
Yakima Thru-Axle Adapter
$34.99
Thru-axle adapter works with WheelHouse to hold wheels with 12mm/15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front Hubs TECHNICAL SPECS - Weight: 0.44 lbs - Dimensions: L 9.00” x W 0.75” x H 2.00”
Yakima New Q-Tower Lock Housings
$39.99
Lock housing for Q Towers. Includes 4 lock housings. SKS lock cores not included (sold separately).
Yakima SmarT-Slot Kit 1
$39.99
Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1. This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market. PRODUCT DETAILS - Includes T-slot hardware, covers, and install tool. - Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts. - Compatible with Yakima JetStream bars and most other T-slot style crossbars. TECHNICAL SPECS - Weight: 0.25 lbs
Yakima SmarT-Slot Kit 5 (for TopWater)
$44.99
Add the SmarT-Slot Kit 5 to the TopWater box for an even sleeker profile on T-Slot Crossbars. This easy hardware kit replaces the standard mounting hardware, and directly attaches into a T-slot channel on your crossbars. It works with all Yakima T-slot crossbars as well as most other T-slot crossbars. Product Details: - T-slot hardware kit for the TopWater rooftop fishing rod box. - Includes T-slot hardware, covers, and an install tool. - Compatible with all Yakima T-slot crossbars and most other T-slot crossbars. Product Specs: - Weight: 0.12 lbs - Dimensions: L 0.75in x W 0.75in x H 1.60in
Yakima ArmLock Cable Lock
$49.99
Yakima's ArmLock cable lock is compatible with their DoubleDown Ace rack (sold separately). It integrates into the rack, stowing in the rack's arm when the lock is not in use. And, you simply pull it out and wrap it around the outside bike and lock it to safeguard your bikes on the rack.
Yakima MightyMount 23H Set of 4
$49.99
Horizontal MightyMounts are simple attachments that make gear-specific Yakima mounts compatible with most factory car rack systems.
Yakima SKS Lock Cores (2-Pack)
$49.99
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
Yakima Wear Strip
$49.99
Why let loading and unloading take a toll on your gear and rack systems? Our new, extra-thick Wear Strip is a raised rubber strip designed to protect equipment and T-slot crossbars. Sold in trim-to-fit pairs, the Wear Strips install easily and help keep out debris. Product Details: - Durable rubber strip protects gear and crossbars from the wear-and-tear of loading - 76" length can be easily trimmed to fit any bar width - Compatible with Yakima HD Bar and JetStream Crossbars - Set of two Product Specs: - Weight: 0.50 lbs - Dimensions: L 76.00in x W 1.12in x H 0.33in - Fully assembled
Yakima Round CrossBar Pads
$54.99
If it floats and fits on crossbars, these Crossbar Pads will help protect it. - Goes great with kayak stackers, heavy-duty straps, and strapthang
Yakima 1 1/4-Inch Hitch Adapter
$59.99
Yakima's 1 1/4-Inch Hitch Adapter makes a 2-inch hitch bike carrier compatible with 1 1/4-inch hitch receivers.
Yakima SUP Brah
$59.99
Our nose/tail tie-down system for stand-up paddleboards and other board styles. Because the long boards need some love too, especially the long ones - our S.U.P. Brah provide some extra security for these. -Extra security for even the longest boards -They work with most styles of surf and paddleboards, but can also be used on a variety of watercrafts that lack the tie down points for additional security -Pair them up with lockable Yakima RipCords or Heavy Duty Straps to carry your boards safely to the beach -Our S.U.P. Brah is sold separately or included as a component of the WaveHog
Yakima Soft Strap
$59.99 - $69.99
A tough, dependable tie down, the SoftStrap delivers strength and protection. Durable webbing secures the load, a neoprene cover protects boats, coolers and vehicles, and an integrated hook and loop cover stashes excess strap so it’s not flapping in the breeze. Product Details - Long 8 to 16-foot tie down secures kayaks and larger gear - Neoprene cover protects boats, gear and vehicle - Integrated hook and loop cover makes it easy to stash excess strap - Sold as a pair - Combine with our Aero Crossbar Pads for an easy to use surf setup
Yakima Fat Bike QR Locking Skewer
$64.99
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop. Product Details - Durable stainless steel axle and body - Easy to adjust end nut and cam lever - Lockable with a SKS lock, sold separately - Includes 9mm x 135mm threaded adapters for Yakima ForkChop - Includes 135mm sleeve for use on Yakima HighSpeed Product Specs - Weight: 1.15 lbs - Dimensions: L 9.50" x W 3.50" x H 1.25"
Yakima LockNLoad Crossbar Clamps
$64.99
Use these clamps to attach the LockNLoad platform to an existing Yakima roof rack, factory rack, or other aftermarket roof-rack system. One pair of clamps is required for each crossbar. Check your vehicle fit to verify requirements. Product Details: - Sold as a set of 2 clamps, with included hardware to attach to a single crossbar. - The LockNLoad platform requires 2 or 3 sets of Crossbar Clamps (check your vehicle's and platform's fit requirements for the number of crossbar clamps needed). - Welded steel construction for strength. - Rubber pads protect crossbar finish. - Compatible with all Yakima crossbars, along with many other aftermarket crossbars, factory crossbars, and 2" round or square tubing. - Each set of crossbar clamps adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of crossbar clamps. Never exceed the Yakima- or manufacturer-specified weight limit for your vehicle. Product Specs: - Weight: 1.86 lbs - Dimensions: L 2.75in x W 1.80in x H 1.00in - Some assembly required, 15 minute install
Page 1 of 4 Next page