Chainrings

• New asymmetrical tooth profiling and more upshift and downshift zones yield instantaneous, smooth and quiet shifting • CNC-machined from super-hard AL-7075 to maximize wear resistance and impact strength • Three times stiffer than Team and Race rings • 3x10 chainrings are compatible with 9-speed drivetrains if a complete set is used

- Shimano, 36T, 9 sp, BCD 104mm, 4-Bolt, Deore FC-M590, Middle Chainring, For 26/36/48, Aluminum, Black, Y1LD98090

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

This direct mount chainring coincides perfectly with the Comet Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. - Long tooth profile enhances chain retention - Thick-Thin tooth design for maximum chain engagement - Laser-etched logos

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains. - 104mm BCD - Material: Aluminum

- The oversized chainrings are CNC machined 7075 Aluminium blanks—2mm thicker than the competition. - Unparalleled stiffness is delivered by an increased Bolt Circle Diameter (BCD) and a two-piece insert-molded carbon composite construction. - The XX Crank geometry provides a narrow 156mm Q factor, efficient chainline, and beveled crank arms to maximize clearance. - X-Glide is the pure science in action common denominator that gives XX its unmatched shifting performance. - 80mm BCD

- Shimano, Tiagra FC-4700, Chainring, Teeth: 34, Speed: 10, BCD: 110, Bolts: 4, Inner, Aluminum, Grey, Y1RC34000

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Shifting performance has helped Full Speed Ahead to become a world leader for high-end chainrings. No one studies the design and manufacturing of each system, and each tooth, as carefully as we do. Our dedication shows in every revolution of the crank, and every perfect shift achieved. To meet or exceed the needs of any drivetrain, Full Speed Ahead has developed sophisticated design, testing and manufacturing protocols. This allows Full Speed Ahead to match your needs as perfectly as our chainrings match a chain. We offer more options, levels, and finishes than our competitors. We use the best materials available, imported from the USA, Europe, or sourced from our qualified vendors in Asia, to guarantee the durability, performance, and appearance will out-perform, and outlast the competition. Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations. - Stamped AL7075/T6 - Chainrings are compatible with all 10-speed drivetrains, and compatible with FSA, SRAM, and Shimano 11-speed drivetrains - Drivetrain Speeds: 11, 10

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

Shimano 105 5703 10-Speed chainrings are a quality, reliable replacement option for worn out chainrings on triple cranksets.

A tight and consistent 13-tooth gap between chainrings delivers accurate and dependable shifting and is the core of our X-Range gearing. Our smaller chainrings paired with wide-range, 10t-start cassettes provide more efficiency and more time in the big ring. It's modern gearing for today's riders. - Crisp and accurate front shifts - Durable finish - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear

Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations. - Chainring can be used with FSA SL-K direct mount outer chainrings - Precision CNC machined AL7075/T6 - Shifting ramps and stainless steel pins on outer rings - Compatible with Modular crankset (Gossamer/Energy / SL-K / K-FORCE) - Laser-etched logo - Material: Aluminum - Ring Position/Type: Inner - Drivetrain Speeds: 11 - Chainring BCD: 90mm

Shimano Dura-Ace 9000 11-Speed Chainrings. - Chainring BCD: 110 Shimano Asymmetric - Color: Black - Defined Color: Black - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner

Get your bike back on the road with a new chainring. - For use with 1-piece crank - Steel construction Specifications: - Size: 44t, Direct mount - Speed: 1 - Material: Steel

- Shimano, 48T, 9 sp, BCD 104mm, 4-Bolt, Deore FC-M510, Outer Chainring, For 26/36/48, Aluminum, Silver, Y1DS98210

The Shimano R9100 series crankset achieves the ultimate in optimal power transfer. It does this through a reinforced chainring on its unique asymmetrical four-arm spider construction. - Chainring BCD: 110 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner

- Precision CNC-machined AL7075/T6 - Shifting ramps and stainless steel pins on outer rings - Laser-etched logo - Crankset Compatibility: Gossamer ABS 2019

12 Speed Sweetness If you're looking for a bomber new chainring that can run with your Shimano 12-speed drivetrain, then look no further. This ring, with our NW tooth profiling can bolt to any 104 BCD spider and is stiff, turning all your "push" into straight-up "go". Drivetrain Fully Dialed Bringing renowned RF narrow-wide tooth profiling for chain security to your 12-speed Shimano drivetrain with a 104 BCD crankset. Built to Last Made of a 4mm-thick 7075-T6 alloy plate for big-time stiffness and superhero strength. - Compatible with 104 BCD 4-Arm Cranks - 7075 Aluminum

RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH, and everything in-between. - 7075-T6 aluminum, aerospace grade strength - Compatible with 9, 10, 11 and 12 speed - Stiff 4mm plate thickness and I-beam construction transfer loads without flexing - Reversible laser etched graphics - Non-threaded bolt holes

Replace worn out chainrings or change out gearing with SRAM's RED X-Glide Chainrings. These solid rings are crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM RED 10-speed Exogram compact crank, these are the rings for you. RED Exogram cranks have a hidden 5th bolt behind the crank arm

Replace worn out chainrings or change out gearing with SRAM's RED X-Glide Chainrings. These solid rings are crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM RED 10-speed Exogram* standard crank, these are the rings for you. RED Exogram cranks have a hidden 5th bolt behind the crank arm

- Shimano, 44T, 9 sp, BCD 104mm, 4-Bolt, Deore FC-M590, Outer Chainring, For 22/32/44, Aluminum, Grey, Y1LD98100

Designed for use with a 104 BCD interface of any 104 BCD spider, This chainring utilizes SRAM's T-TYPE design and is backwards compatible with Eagle technology (X-SYNC II). SRAM drivetrain engineers optimized this ring to combat the high-torque, high-wear situations e-bike riders face. The aggressive tooth design provides better chain retention for a smoother, more efficient pedal feel with a focus on long wear-life. - High durability steel construction - Backwards compatible with other Eagle Technology - AeroGuard compatible with steel rings that Fufills EN 15194:2017 standard

Engingeered to interface with Bosch motor systems, SRAM drivetrain engineers optimized this ring to combat the high-torque, high-wear situations e-bike riders face. The aggressive T-Type tooth design provides better chain retention for a smoother, more efficient pedal feel with a focus on long wear-life. - Steel (36T,38T). - AeroGuard Compatible that fufills EN 15194:2017 standard - Backwards compatible with other Eagle Technology.

Rugged durability comes naturally to the Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised. Available in three different tooth counts, there is ample room to refine and customize your bike’s feel. - 8 Bolt direct mount - 30-38T range and +3mm offset variants - Compatible with T-Type chains

Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Boost 3mm offset

Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Non-Boost 6mm offset